Descriptions:
Flexographic printing machine, also called aniline press which uses photosensitive resin plate as the printing plate of printing machine. It adopts environmental ink and has advantage of low edition-producing cost ,this is an ideal machine for mass lots , large variety production manufacturer It is also snitable for printing HDPE,LDPE,PP.cellophane paper,rolling paper etc.

Technical Parameters:
	Type YT-600 TY-800 YT-1000 Max.Width of Printing 550mm 750mm 950mm Max.Printing Length 914mm 914mm 914mm Max.Diameter of Printing Length 450mm 450mm 450mm Printing Speed 5-50m/min 5-50m/min 5-50m/min Printing Color Number 4(6) 4(6) 4(6) Format Mater Thickness 0.02-0.06mm 0.02-0.06mm 0.02-0.06mm Total Power 19kw 19kw 19kw Machine Weight 3.7T 4T 4.3T Overall Dimensions(L-W-H)mm 3850-1850-2250mm 3850-2050-2350mm 3850-2250-2350mm

Use:
	It applies to blow various LDPE, HDPE and LLDPE plasticfilms, widely applying to food, fruit, clothing, textile, vesttype bag and etc. Packing of civil industrial products.
	Feature:
	LLDPE MULCH BLOWN FILM LINES are made to process 100% LLDPE, LLDPE - LDPE blend, which could produce agriculture mulch film. The lines are adopted the most advanced hot channel technology,extrusion forming mulch film special air ring and so on new technologies.The lines are reasonable in design,beautiful in appearance, compact in structure, saving inspace and easy to maintain. Produced films are with the charactics of good plasticizing,high physicaland mechanical performance,strongtear resistance. Technologies for the lineare advanced and forming a complete set is rea-sonable, so the lines are high in output, low in energyconsumption,good in stability and reliability. They are the most ideal technical processing equipment to priduce agriculture mulch film in new century.
	Technical Parameters:
	Type SJ-1700 SJ-2200 SJ-3400 Diameter of Screw(mm) 75 90 110 Max.Layflat Width(mm) 1500 2000 3200 Film Thickness(mm) 0.005-0.08 0.005-0.08 0.005-0.08 Max.Output(kg/h) 80 100 130 Screw L/D Ratio 28:1 28:1 28:1 Power of Main Motor(kw) 37 37 55 Power of Traction Motor(kw) 1.5 1.5 2.2 Total Power(kw) 65 90 145 OverallDimensions(L-W-H)mm 6000-2800-5800 8500-3800-8000 1000-5000-9600 Weight(T) 10 14 26

Technical Parameters:
	Max Diameter of Unwinder 700mm Max Width of Unwinder 1300mm Slitting Thicknerss 0.015-0.15mm Slitting Width 50-1300mm Max Diameter of Rewinder 420mm Max Slitting Speed 300m/min Total Power 13kw Overall Dimension(L-W-H) 2750-1750-1600mm Weight 3.5T

Technical Parameters:
	Motor Power 7.5kw Overall Dimension(L-W-H) 600-600-1450mm Weight 0.4T

	Technical Parameters:
	Type XGB-100 XGB-180 Max.Blanking Pressure 98-10N 176.6-10N Max.Stroke 45mm 45mm Dia.of Oilpump 100mm 120mm Working Pressure of Oil Pump 15.69Mpa 18.14Mpa Motor Power 1.1kw 1.5kw Area of Working Table 650-400mm 800-400mm Overall Dimension(L-W-H) 700-760-1260mm 900-800-1480mm

Technical Parameters:
	Bag Making Width 100-600mm Bag Making Length 30-990mm Bag Making Speed 30-120pcs/min Electric Heat Power 380V.50Hz.2.0kw Power of Main Motor 1.1kw Film Thickness 0.01-0.05mm Overall Dimensions(L-W-H)mm 3500-1160-1400mm

Use:
According to the demands of the market, this machine is designed and manufactured on the base of absorption of advantages in the same field from home and abroad. It is a kind of colorful printing film hot cutting sealing bagmade equipment withmultiple function, high quality.With reasonable structure, wide use and breadth mechanism, it adopts computer control,highautomation,ease of operation, convenience of a djustment, the close location with high precision, stable feeding, tensionin balance; automatic temperature control, automatic counting, alarming in sound; and also with color mark tracking endless time automatic stop etc features. It is widely used inDPP, BOPP, Embossed polythene Self-seaing Machine, etc. It can finish automatic folding film, automatic adhesion, clamp pearlite ball film automatichydraulic, automatic holing in one time.

Technical Parameters:
	Type RQL-500 RQL-600 RQL-800 Bag Making Width 100-400mm 100-500mm 100-700mm Bag Making Length 200-400mm 200-500mm 200-700mm Bag Making Speed 45-120 pcs/min 45-120 pcs/min 45-120 pcs/min Total Power 3.2kw 4.2kw 6kw Overall Dimensions(L-W-H)mm 3200-660-1650mm 3200-760-1650mm 3200-960-1650mm Weight 450kg 500kg 700kg

Descriptions:
This machine is suitable for producing HDPE and LDPE plastic . It adopts the servomotor discharge the in high speed and photocell to track the cutting, punch the "U"shape bag in one tine. And with such features, such as casy operation, high effciencyand high finished products.

Technical Parameters:
	Type GBD-E600 GBD-E700 Sealing and Cutting Width 150-260mm 180-310mm Sealing and Cutting Length 300-650mm 300-650mm Sealing and Cutting Thickness 0.015-0.04mm 0.015-0.04mm Bag Making Speed (5-100)-4pcs/min (5-100)-4pcs/min Motor Power 1.5kw 1.5kw Machine Weight 700kg 700kg Overall Dimensions(L-W-H)mm 3200-1100-1600mm 5200-1300-1800mm Air Compress 5kg/Cm2 5kg/Cm2

Feature:
This aircrew adopts the disposable shaping craft. It is our company that draws dometic and international advanced technology extensively, througha large number of production practiceses in having ordinary equipment originally,develop, designing, can produced polyethylene compound bubble(cushion) membrane in succession. Designs science, practical, rational in structure of the machine.

Technical Parameters:
	Type JD-1500 JD-1200 JD-600 Screw Diameter 75 -60 65 -60 55 -45 Film Width 1500mm 1200mm 600mm Output 20-40kg/h 20-38kg/h 15-30kg/h Total Installed Capacity 80kw 73kw 55kw Screw L/D Ratio 28:1 28:1 28:1

Descriptions:
Flexographic printing machine, also called aniline press which uses photosensitive resin plate as the printing plate of printing machine. It adopts environmental ink and has advantage of low edition-producing cost ,this is an ideal machine for mass lots , large variety production manufacturer It is also snitable for printing HDPE,LDPE,PP.cellophane paper,rolling paper etc.

Technical Parameters:
	Type YT-600 TY-800 YT-1000 Max.Width of Printing 550mm 750mm 950mm Max.Printing Length 914mm 914mm 914mm Max.Diameter of Printing Length 450mm 450mm 450mm Printing Speed 5-50m/min 5-50m/min 5-50m/min Printing Color Number 4(6) 4(6) 4(6) Format Mater Thickness 0.02-0.06mm 0.02-0.06mm 0.02-0.06mm Total Power 19kw 19kw 19kw Machine Weight 3.7T 4T 4.3T Overall Dimensions(L腗腈)mm 3850-1850-2250mm 3850-2050-2350mm 3850-2250-2350mm

Feature:
	Haul-off unit is oscillating reverse by horizontal180ꇣ.Its structure is reasonable, so it economizes lots of energy and it is easy to maintain.By means of the reversing haul-off unit, films can be produced without requiring rotating diehead, so the structure of diehead is simplified. Reversing haul-offunit eliminates many problems of lingchannel for the rotating diehead, diffficult sealing for the melt, compound leakage being easy,unsymmetrical heating, difficult maintenance, macro film tolerance and so on Haul-off unit reduces the drgree of difficulty for recipe of the multi-layer coextruded product and production technical processing control, If the blown filmline is withIBC (Internal Bubble Cooling system), itcan produce film with the quality of more high-grade transp-arency and better all round performance.The produced film is very flat,reel is high-quality by theuse of reversing haul-off units. The film can meet the demand for the high-speed printing.
	Technical Parameters:
	Type M3B-1300Q M3B-1500Q M3B-1700Q M3B-2200Q Max.Layflat Width mm 1200 1400 1600 2000 Film Layer 3 3 3 3 Film Thichness mm 0.02-0.12 0.02-0.12 0.02-0.12 0.02-0.12 Max.Output kg/h 120 150 180 240 Raw Material MLLDPE/LLDPE/LDPE/EVA Screw Diameter mm 55ꇁ3 60ꇁ3 65ꇁ3 70ꇁ3 Screw L/D Ratio L/D 28:1 28:1 28:1 28:1 Screw Max.Rotation Speed 100r/min 100r/min 100r/min 100r/min Extruder Driving Power kw 22-3 ꆡꆡꆡ30-3ꆡꆡꆡꆡ37-3 ꆡꆡꆡꆡꆡꆡꆡ45-3 The Way of Screen Changing of Extruder Manual Twin-station Changing Screen Quickly Die Structure With or Without IBC Air-ring Srtucture Dual-lip Reversing Haul-off System Film Turning Mode Horizontal Reversing Haul-off System Angle of Reversing 180ꇣ Take-off Wind-up Speed 45r/min 45r/min 45r/min 45r/min Total Power kw 85 110 140 220 Overall Dimensions(L-W-H) M 10-6-9 10-6-9.5 11-7-10 13-7-12 Weight T 20 25 32 40

Descriptions:
SJ-90.100.110.120.Air Ciiling Type Plastica Regenerative pelletizer manufactured by our factory, with is used for LDFE, HDPE waste Plastics regenerative pelletizing. The produce ofRegeneratire without air hole and water. with such features as easy operation, low cost high ourpit automatic constant temperature control. Automaticchangefiltrate wed stable performance. long operating life and low noise,it is a more ideal wast plastics film regenerative pelletizer.

Technical Parameters:

Technical Parameters:
Elemental Specilication Applicable Material OPPꉐEꉃPPꉐVCꉐPꉁlumium Foil Max.Machinery Speed 150m/min Laminating Width 600mm-800mm-1000mm-1100mm-1200mm The First Unwind Turret Type Two Shafts Rotating Roll Diameter 600mm Edge Correct System EPC-PC Tension Method Magnetic Powder Brake The Second Unwind Turret Type Two Shafts Rotating Roll Diameter 600mm Tension Method Magnetic Powder Brake Coating Method Eticulete Pattern Directly Coating Method Drying Method Air Circulate Quickly Electrical Heating Oil Heating Vapour Exchanger Synchro Control Method PLC Rewind Turret Type Two Shafts Rotating Roll Diameter 600mm Tension Method Sophisticated Variable Frequency Motor

Use:     High polymer materials such as rubber, plastic and fiber will have a certain shrinkage under a certain temperature. Most products are required to have a good thermal stability and small shrinkage, but some products ate required to have a large shrinkage when heated . The performance that high polymer materials will shrink by heating is opposite to that of metal materials . Taking advantage of this performance .we make the high polymer materials into heat-shrinkable rubber boot,heat-shrinkable membrane plastic,heat-shrinkable fiber and fiber-knitting which will be used for packging . The heat-shrinkable membrane plastic is widely used recent years with the advantage of its transpatency,multiple variety,abound raw materials,ease of producing and using ,The table 1 shows the main performance and the application of the heat-shrinkable membtane plastic. Besides the variety in table 1,,PA,PA,PET,PVCD, EVA etc also can be made into the heat-shrinkable membrane plastic, it is requirded that the hea-shrinkable membrane plastic be stable under normal temperature and shrink when heated. The characteristics of the heat-shrinkable membrane plastic : 1.The transpatency help to present the figure of the product.ꋚIntensive and firm, prevent from the flowability. 3.Small package capacilty reduce the storage and shipment cost.4.Shower-proof,damp-proof and anti-fungus. 5.Healthy and ease of clearing . 6. Nonrelease, ensure the prevention of fake and burglary. 7.Various specification of membrane and wide choices.8.Recycle used and do no harm to the environment .           application:     Specifications Application LDPE Heat-shrinkable membrane Package,drink,foodstuff,medicirie,making-up,electrical appliance,siliconlice,synthetictesin,fetilizer,pottery,glass,wall paper,varnished wire,welding wire,rope mesh,floor borad,aluminun-base alloy,beer,mineral water etc.Electric wdlding rod and welding wire,various high strength packaging for metals.           Technical Parameters:     Type SJ-700 SJ-1100 SJ-1700 SJ-2200 Max.Layflat Widty ꆡꆡꆡꆡꆡꆡꆡmm 600 1000 1500 2000 Film Thichness ꆡꆡꆡꆡꆡꆡꆡꆡmm 0.02-0.15 0.02-0.15 0.02-0.15 0.02-0.15 Output ꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡ kg/h 35 65 85 100 Raw Material LLDPꆢLDPEꆢHDPE Screw Diameter ꆡꆡꆡꆡꆡꆡꆡꆡmm 50 65 80 90 Screw L/D RatioꆡꆡꆡꆡꆡꆡꆡꆡL/D 28:1 Max.Screw Rotation Speedꆡꆡꆡ r/min 100 100 100 100 Extruder Driving Powerꆡꆡꆡꆡkw 11 18.5 30 37 Air Ring Dual-lip Air Ring\Rorary Air Ring Die Structure Cylindrical Helical Die Core\360ꇣ Rotary Die Head Max.Take-off or Wind-up Speedꆡꆡm/min 80 80 80 80 Total Powerꆡꆡꆡꆡꆡꆡꆡꆡꆡkw 28 42 58 75 Overall Dimensions(L-W-H)ꆡ M 4-1.8-3.6 5.8-2.2-6.0 6.5-2.7-6.0 8.2-3.2-8.8 WeightꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡT 2.2 4.5 6 9

	Use:
	The Double Die Head Two-Colour Striped Film Blowing Machine Set is composed with two screw stemsand cylinder with onedie head, it adopts the device of two different plastic materials, which can blow different kinds of striped vest bags (shopping bag), it can get colorful bags without pringting ,with such features as beautiful colors, average stripe, logical structure, advancedtechnology, even rewinding and high output.
	Feature:
	1. The full set machine is made of twosets main motors, two cylinders and one layer die head, feeding by two cylinders. Extruding with one die head one traction and rewinding device , it can improve the quality of striped film by adopting with one traction and one rewinding device. 2. The screw stem and cylinder ate made of 38CrMoAl high quality alloy steel after fine finishing and nitrided treatment, which has high hardness,strong resistance to corrosion, durable service. 3. The die head is plated with hard chrome ,of screw mandrel type structure with even and smooth discharging, the blownplastic film has fine finishing ,the blower is of labyrinth structure with even air output. 4. The coiling unit adopts pressutre friction rewinding or center rewinding , which is driven bytorque motor , with even and smooth rewinding and easy roll changing.
	Technical Parameters:
	Type SJ-45 SJ-55 Diameter of Screw 45mm 55mm Screw L/D Ratio 28:1 28:1 Screw Spead 10-110r/min 10-110r/min Max.Output(kg/h) 45kg/h 60kg/h Max.Layflat Width (mm) 550mm 650mm Film Thickness(mm) 0.006-0.10mm 0.006-0.10mm Power of Main Motor 11kw 18.5kw Total Power 30kw 40kw Weight of Machine 2200kg 3000kg Overall Dimensions(L腗腈)mm 4800-2200-2600 5000-2400-2200

Use:
Thermal shrinkage film for packing ( applying to box-packing products, such as packing and bulk of audio-video tape, toy, disc, magazine, drinking cup, glass, frozen food and etc., And packing of Irregular shaped products, such as bread, vegetable,fruit, advertising material, paper, pickup camera, camera, painting brush, shoes, sweet food and etc.), Annealed film (applying to packing of pressure sensing gummed tape, cigarette, laminated film, metal spray plating film, pearlite film, sweet food, baked food, packing material of external box, flower, dried fruit, thin and crisp potato chips and etc.), Special film for special purpose (such as axial oriented nylon film, BOPA and polyester film BOPET, thermal seal film, protective film, thermal shrinkage
Film and annealed soft film, single layer, thermal shrinkage film and etc).
Feature:
1. Composed by three squeezing machines, joint squeezing rotatory die head, system of wind cooling and water cooling, double axial film, double-bubble squeezing productive line, infrared heating, motor control system and etc. Parts.
2. Die head and cooling wind ring rotates continuously in order to ensure drawing in and rolling up of film is even and smooth.
3. (?50-300)change of die head,applying to blow film with different specifications.
4. Dispose various functional elements on the spot according to the selection of consumer.

Technical Parameters:
	Width of Finished Product(mm) Massive Line Standard Line Small Line Minisize Line 2400-3000 1800-2400 1500-1800 1000-1000 Output(kg/h) 15 Micron Film 250 200 140 100 20 Micron Film 300 250 155 100 25 Micron Film 340 260 155 100 Screw Diameter(mm) 15 Micron Film 130-75-75 130-75-75 45-50-55 60-40-40 20Micron Film 130-75/100 1300-75 75-50 60-40 25 Micron Film 130-130 130-130 100-100 75-75 Machine Weight 22 16 15 15 Total Power(kw) 200 160 140 90 Overall Dimensions(M) 8.5-6.0-8.0   8.0-5.6-7.7 7.4-4.5-6.6  7.4-4.4-6.6

Technical Parameters:
	Motor Power 7.5kw Overall Dimension(L-W-H) 600-600-1450mm Weight 0.4T

	Technical Parameters:
	Max Diameter of Unwinder 700mm Max Width of Unwinder 1300mm Slitting Thicknerss 0.015-0.15mm Slitting Width 50-1300mm Max Diameter of Rewinder 420mm Max Slitting Speed 300m/min Total Power 13kw Overall Dimension(L-W-H) 2750-1750-1600mm Weight 3.5T

	Technical Parameters:
	Packed Object melon seeds,seeds,been,salt,etc. Packde Material paper/polythene,aluminum foil/polythene,BOPP/polythene,etc. Packed Speed 25-45pcs/min Size Making Bag length 100-240-Width75-190(mm) Voltage 220v/50Hz Power 60W-3=180W(not include empty pressure machine) Power of Heat Seal horizontal seal500W+vertical seal600w=1100W Wastage of Air Power Supply 0.8Mpa 0.45cublc meter/minute Size 3300-800-2400mm Quality of Main Machine 900kg

Technical Parameters:
	Power Of Main Motor 4kw,Controlled By Inverter Power of Take-off Motor 0.75kw,Controlled By Inverter Screw Diameter 35mm,Made of Alloyed Steel 38 Crmoala With nitriding and posishing Speed of Screw 5-100r/minute Cooling With Water Tank to Cool Winding Motor 0.75kw,Controlled By Inverter Machine Size L-6M W-0.8M H-0.3M Machine Weight 3T Raw Material LDPE Heating Power 7kw Temperature Controling Way Automatic

Technical Parameters:
	Power Of Main Motor 4kw,Controlled By Inverter Power of Take-off Motor 0.75kw,Controlled By Inverter Screw Diameter 35mm,Made of Alloyed Steel 38 Crmoala With nitriding and posishing Speed of Screw 5-100r/minute Cooling With Water Tank to Cool Winding Motor 0.75kw,Controlled By Inverter Machine Size L-6M W-0.8M H-0.3M Machine Weight 3T Raw Material LDPE Heating Power 7kw Temperature Controling Way Automatic

	Technical Parameters:
	Clamp Playe Stroke 25mm Operating Pressure 3-6T Distance of Table and Clamp Plate (When Eccentric Wheel is on the top) 120-170mm Height of Table 650-720mm Spindle Speed 260r/min Generator Power 1.1kw Machine Weight 500kg

Use:
This machine applies to seal cuttingof LDPE, HDPE and etc.Plastic films, natural color, color printing bag and etc., It suits to process tube type plastic natural color vest bag.

Feature:
1. Adopt infrared 4 light-dependent control full-automatic feeding, double-layer automatic bag-making,automatic counting and displaying, always set quantity, quickspeed, stable and reliableperformance, regular discharge and etc. Many-sided excellent characteristics.
2. Seal cutting device with novel design, thermal cutting knife made of special steel, it is sharp and won be worn and torn forever. Seal pressureis adjusted conveniently, seal cutting device can be turned over 180 wholly,it is easy to clear and change gummed tape.
3. Electric appliance, frequency-changer motor, fittingimport electromag-netic clutch with high performance and brake to make this machine to reach high speed, energy conservation and durable.
4. Seal and thermal cutting are synchronization, without pulling force fully,seal bottom is firmly.
5. Feeding of film adopts import photoelectric control, and having speed adjusting device, bag-making is correct.

	Technical Parameters:
	Bag Making Speed 20-380pcs/min Power of Main Motor 1.1kw Film Width 100-500mm Film Thickness(mm) 0.005-0.015mm Film Length 50-1000mm Overall Dimensions(L-W-H)mm 3500-1100-1500mm

Use:
Raw materials of this machine should be selected LDPE, index in 4.5-5.5, widely applying to high gradepacking of food, sugar, medicine, jewelry, clothing, metal fittings, documents, directions, files andetc.,The market potentiality is great.
Feature:
We have the production history for many years, products for many years, products have the features of with reliable quality,easy to operate, correct. This machine is composed by heating, automatic control, die head of film blowing, drawing film in and etc. Mechanisms with reasonable designand stable performance.

	Technical Parameters:
	Technical Standard Q/ZDSJ104-2001 Diameter of Screw 50mm Screw L/D Ratio 28:1(L/D) Rational Speed of Screw Stem 10-100rpm Specification OF Die Head (mm) 80/120/160/200/240/300 Thickness of Products 0.018-0.10mm Folding Width of Products 80-450mm Power of Main Motor 5.5-7.5kw Heating Power 16kw Output 5-35kg/h Machine Weight 1.6T Overall Dimensions(L-W-H)mm 5250-1800-4200

This machine takes LDPE as materials, widely applying to packing of food, medicine,jewelry,metal fittings, document and etc., Market potentiality is great, it also applies to make and seal without thread PVC thermal shrinkage film, OPP socks bag, one machine has multipurpose, economic and reasonable.

Feature:
This machine is made by our factory through researching and improving for many times, having the features of correct positioning, quick making bag, easy to operate and etc., The price of it is only 1/3 that of thesimilar product of foreign country. It is composed by computer automatic positioning, power transmitting, feeding thermal cutting, auxiliary and etc. Four machine systems, having the features of reasonable design, compact structure, superior performance.

Technical Parameters:
	Bag Making Speed 45-140pcs/min Bag Making Width 20-750mm Bag Making Length 30-500mm Total Power 3.2kw Total Weight 550kg Overall Dimensions(L腗腈)mm 3200-860-1650mm

Performance-Use::
GBD-700 FLAT-BOTTOMED - VEST BA G MAKER. The equipment is designed and manufactured on the basis of overseas advanced technology as wel as domestic leading productof the same kind. As a fully automatic computer-controlled bag maker, it is mainly used to manufacture bags with films like PE, PP, PVC, etc. Equipped with various functions, such as photoelectric controlled automatic feeding, photoelectric color-code follow-up, double or quadruple feeding, double or quadruple sealing, motor speed and bag length control by computer, automatic pile-up, etc. This machine is an ideal one to produce vest bag, flat-bottomed bag and fertilizer bag.

Technical Parameters:
	Type GBD-600 GBD-700 Bag Making Width 100-500mm 100-600mm Bag Making Length 50-1200mm 50-1200mm Bag Making Speed 20-400pcs/min 20-400pcs/min Bag Making Thickness 0.008-0.10mm 0.008-0.10mm The Kinds of Bag making Printing Bag;White Bags Bag Making Methods Single Sealing and Single Cutting;Double Sealing and Single Cutting Total Power 3.0kw 4kw Overall Dimensions(L-W-H)mm 2800-1100-1500mm 3800-1300-1580mm

Descriptions:
1. This bottom sealing machine is suitable for making natural color-printed plastic bags. Meanwhile, if the film without color code, the machine can be operated with double production lines.
2.The machine has automatic photoelectric control feeding system, automatic temperature comtrol system, electric static eliminating system, automatic counting system, and alarm system etc. it is an ideal bagmaket for producing fresh-resisting bag and rubbish bag with the merits of easy operation, steady function and good sealing etc.
3. The machine had more functions. Afterremoved the dot blade instead of flat blade, substituted the unwinding platen for the unwinding device, the madine can be produced the vest bag and flat-rim bag etc.

	Technical Parameters:
	Type GBDR-600 Sealing and Cutting Width 50-500mm Sealing and Cutting Length 100-1200mm Sealing and Cutting Thickness 0.02-0.15mm Bag Making Speed Printed Bag 10-80pcs/min;Plain Bag 20-160pcs/min Error in Length 2mm Motor Power 1.1kw Machine Weight 700kg Overall Dimensions(L腗腈)mm 3200-1100-1600mm

Performance - Use?/STRONG>
1. It is applicable to all composite films.
2. All parameters are displayed on CRT,and it is allowed to preset bag-making speed,bag-making length,ironing knife temperature,number counting andlot counting,hole-punching,hole punching time and times delivery,easy to handle.
3. Manual or automatic control of roll unwinding tension,photoelectric bias correction,constant control by middle pneumatic device.
4. Realize function of several selections of hole-punching and super-lenghe bag times delivery,possiblefor edge scrap cutting off and collecting ,and static eliminating.
5. Auto stop protection and high-positiong stop for middle tension and color bar loss ,
6. Edge ironing is with bridged-structure.

Technical Parameters:
	Type Max.diameter Max.Width Length Width Bag-making Type Traction Motor JDL-600B ?00mm 1200mm 50-500mm Super-Long Selection.Times Deliver 80-600mm Three-edge Sealing Among Four Lines AC Dual-servo JDL-500B ?00mm 1000mm 50-500mm Super-Long Selection.Times Deliver 80-500mm Three-edge Sealing Among Three Lines Three-edge Sealing Among Two Lines Dual-stepping (Dual-servo) JDL-400B ?00mm 800mm 50-500mm Super-Long Selection.Times Deliver 80-400mm Three-edge Sealing Mode U Word Bag Dual-stepping (Dual-servo)
	Driving Motor Control Edge Sealing Bottom Sealing Bag-making Speed Power Air Source Machine Weight Overall Dimensions Double Frequency Conversion 10-40mm 5-60mm 30-160 22kw 0.6Mpa (6kg/cm2) 4200kg L8000-W2000-H2100mm Single(double) Frequency Conversion 10-40mm 5-60mm 30-140 18kw 0.6Mpa (6kg/cm2) 3600kg L8000-W1900-H1900mm Single(double) Frequency Conversion 10-40mm 5-60mm 30-140 15kw 0.6Mpa (6kg/cm2) 3000kg L8000-W1800-H1700mm

Use:
1. The most usage pallet packaging: such as fertile, cement, chemicalindustrial raw material, building material etc.
2. Horizontal packaging: metal pipe, aluminum alloy material, timber etc.
3. Rotational twist: rolling paper, carpet etc.
4. Binding: glass container, acceptance etc.
5. Break-bulk packaging: soybean, grain, plastic particle etc.
6. Storage packaging: such as grass.
7. Manual packaging: it is used in wholesales, journal, printing, electronic product, foodstuff etc.
8. Ring twist packaging: type, wire, cable, steel silk etc.

Technical Parameters:
	Type SLW650 SLW1100 Diameter of Screw 55 65 Screw L/D Ratio 28:1 28:1 Power of Main Motor 11kw 18.5kw Electric Heating (kw) 30 45 Max.Extruding Volume 35 60 Thickness (mm) 0.01-0.08 0.01-0.08 Power of Draw-off Motor 1.5kw 2.2kw Refuse Recycling Automatic Rewinding Automatic Rewinding Film Width(mm) 500 1000

Descriptions:
	This machine set is suitable for continuously printing such packing products ad variors plastic film, currency, cloth and thin leather , etc. Pringting of one side or two sides can be finished through once operation. The register sets of 360ꍣan make the colour registration, which will not influence the reaction of film. Equipped with far infrared tube drying unit, this machine set can dry bags up to 50m/min. And it can print clear and exquisite image, model 1-8colour machines can be chosen at will.
	Technical Parameters:
	Type ASY-600 ASY-800 ASY-1000 Printing Width 600mm 800mm 1000mm Printing Length 200-900mm 200-900mm 200-900mm Printing Speed 10-60m/min 10-60m/min 10-60m/min Accurate Registration 0.06-0.20mm 0.06-0.20mm 0.06-0.20mm Power Of Main Motor 2.2kw 4kw 7.5kw Power OF Fan 0.12kw 0.12kw 0.12kw Heating Power 2kw 3kw 4kw Overall Dimensions(L腗腈)mm 1200-1400-2000mm 1200-1600-2000mm 1200-1800-2000mm

	Technical Parameters:
	ITEM Main Technixal Parameters Suitable Material OPP.CPP.PE.PVC and Other Soft Film,or Roll Material Such as Paper,Aluminum Foil etc. TYPE SWASY600 SWASY800 SWASY1000 SWASY1300 Printing Width 600mm 800mm 1000mm 1300mm Pringting Color Number 1-10 Colour Machine Speed 90-180m/min Max.Printing Speed 80-120m/min Chromatography Precision 耰.1mm Diameter of Plate 100-300mm Installation of Plate Shaftless Marking Method Single Pressure By Suing Single Pressure By Slip Dry Method Heat-cold Dry/Electric Heat Plate System Computer Automatic Colored Plate System Winding and Unwinding Method Double Shaft Rotate By ManualDouble Shaft Rotate By Electromtion Winding and Unwinding Diameter Winding and Unwinding Clamp 600mm800mm Shaft By Manual Air-blowing Cclmp Deviation-correcting Unit Hand-moving Deviation-correcting Photocell Automatic Deviation-correcting Contol System Tension Control Output By Electromagnetism Rdgulating Motor and Reducer Output By Transducer motor and Reducer Feeding Format Manual FeedingAuto Loading Feeding Unit Main Transmission Transmission Output By Electromagnetism Rdgulating Motor and Reducer Output By Transducer Motor and Reducer Total Power(as six-color) SWASY600 48kw SWASY800 70kw SWASY1050 90kw SWASY1300 120kw Overall Dimension(L腗腈) 14000-1800 -2400mm 14000-2100 -2400mm 14000-2400 -2400mm 140002700 -2800mm Weight 15T 18T 20T 25T

Use:
Raw materials of this machine should be selected LDPE, index in 4.5-5.5, widely applying to high gradepacking of food, sugar, medicine, jewelry, clothing, metal fittings, documents, directions, files andetc.,The market potentiality is great.
Feature:
We have the production history for many years, products for many years, products have the features of with reliable quality,easy to operate, correct. This machine is composed by heating, automatic control, die head of film blowing, drawing film in and etc. Mechanisms with reasonable designand stable performance.

	Technical Parameters:
	Type SLB-400 Diameter of Screw 55 mm Screw L/D Ratio 28:1 No.of Heads 2pcs Film-blowing Width 100-400mm Film-blowing Thickness LDPE0.015-0.20 HDPE0.008-0.05mm Output 10-45kg/h Total Power 28kw Overall Dimensions(L腗腈)mm 5000-2500-3500 Total Weight 3500kg

Technical Parameters:
	Type of Machine GSL-90 GSL-120 ꅇGSL-200 Power Of Main Motor 11KW 18.5KW 75KW Power of Material Cutting Machine 1.1kw 1.5kw 15kw Output 50kg/h 85kg/h 200kg/h Weight of Machine 1.0T 1.5T 2.0T Heating Power 1.1kw 1.5kw 2.0kw

Use:
	Mainly pack audio-video tape, toy, disc, magazine, glass, advertising material, camera, painting brush,shoes,sweet food and soon.
	Feature:
	1. Composed by three squeezing machines, joint squeezing rotatory die head, system of wind cooling and water cooling, double axial film, double-bubble squeezing productive line, infra-redheating, motor control system and etc. Parts. 2. Diehead and cooling wind ring rotates continuously in order to ensure drawing in and rolling up of film iseven and smooth. 3. (?00-200) changeof die head, applying to blow film with different specifications. 4. Dispose various functional elements on the spot accordingto the selection of consumer.
	Technical Parameters:
	Type SJ-55 SJ-60 SJ-70 Diameter of Screw(mm) 55 60 70 Max.Layflat Width(mm) 100-550 200-600 300-800 Film Thickness(mm) 0.01-0.10 0.01-0.10 0.01-0.10 Max.Output(kg/h) 40 45 65 Screw L/D Ratio 28:1 28:1 28:1 Power of Main Motor(kw) 11 15 18.5 Power of Traction Motor(kw) 1.1 1.5 1.5 Overall Dimensions(L腗腈)mm 4500-1100-300 4800-1100-300 5000-1500-300 Weight(T) 1.9 3.0 4.0

Use:
Raw materials of this machine should be selected LDPE, index in 4.5-5.5, widely applying to high gradepacking of food, sugar, medicine, jewelry, clothing, metal fittings, documents, directions, files andetc.,The market potentiality is great.
Feature:
We have the production history for many years, products for many years, products have the features of with reliable quality,easy to operate, correct. This machine is composed by heating, automatic control, die head of film blowing, drawing film in and etc. Mechanisms with reasonable designand stable performance.

Technical Parameters:
	Power of Main Motor 5.5-24KW Assistance Machine 0.75KW Heating 12KW Die-Head 50-300mm Choose freely Screw Diameter 45/50/55/65mm Choose freely Screw L/D Ratio L/D 28:1 Screw Speed 10-100r/min Max Ouput 30-70kg/h Film Thickness 0.08-0.10 mm Film Width 50-1200 mm Weight 2-4.5T

Use:
Raw materials of this machine should be selected LDPE, index in 4.5-5.5, widely applying to high gradepacking of food, sugar, medicine, jewelry, clothing, metal fittings, documents, directions, files andetc.,The market potentiality is great.
Feature:
We have the production history for many years, products for many years, products have the features of with reliable quality,easy to operate, correct. This machine is composed by heating, automatic control, die head of film blowing, drawing film in and etc. Mechanisms with reasonable designand stable performance.

Technical Parameters:
	Type SJ50 SJ55 SJ60 Performance Raw Material P.V.C Film Thickness(mm) 0.02-0.08 0.02-0.08 0.02-0.08 Film Width(mm) 70-300 150-500 200-700 Output(kg/h) 8-40 15-50 20-60 Extruder Screw Diamete(mm) 50 55 60 Screw L/D Ratio 28:1 28:1 28:1 Main Motor(kw) 11 15 18.5 Heating(kw) 10 13.7 18.5 Die-head Die-Head Diameter(mm) 40/80 60/120 80/140 Die-Head Heating(kw) 1.8/2.2 2/2.5 3/3.5 Winder Winding Ability(mm) 400-400  400-600  400-800 Winding Motor(kg/Nm) 10 15 20 Else Machine Weight(T) 1.5 1.8 2.2 Machine Dimensions(M) 4-1.4-2.5  6-2.5-3.5 6.2-2.7-3.8

Use:
It applies to blow various LDPE, HDPE and LLDPE plasticfilms, widely applying to food, fruit, clothing, textile, vesttype bag and etc. Packingof civil industrial products.
Feature:
Mode SJ-50-85 squeezing machine is adopted rotatory die head,machine tube is adopted 38CrMoAl,having the best hardness and corrosion-resisting performance after nitrogen treatment and precision processing.

FM-600 auxiliary machine can adjust and operate freely within the range of 700mm in accordance with the technological demand of different materials, and having package board mechanism which can make vest type bag.

Rolling up device with double-drawing in and do-uble cutting ope, its power is adopted moment motor, with friction plate,it can keepsuitable tension, drawing in and rolling up in good order, easy to change roll.

	Technical Parameters:
	Power of Main Motor 5.5-24KW Assistance Machine 0.75KW Heating 12KW Die-Head 50-300mm Choose freely Screw Diameter 45/50/55/65mm Choose freely Screw L/D Ratio L/D 28:1 Screw Speed 10-100r/min Max Ouput 30-70kg/h Film Thickness 0.08-0.10 mm Film Width 50-1200 mm Weight 2-4.5T

Use:
	Three-layout Extruding Film Machine is composed of three sets of extruding screw rod mechanism, dieheadmechanism, draw-off mechanism, heating device, secondary heating inflation device, blowing fo rmingsystem, automatic cuttingmechanism, automatic control system as well as cooling system etc.
	Technical Parameters:
	Output 30-100kg/h Rewinding Speed 40-60m/s Film Thickness 0.012-0.035mm Folding Width 1000mm Screw L/D Ratio 28:1 Diameter of Die-head 150mm Diameter of Screw Rod 65/50/50mm Total Power 90kw Dynamic of Screw Rod 18.5/7.5/7.5kw Heating Power 12/10/10kw Power of Die-head 11.8kw Power of Oven 118kw

Use:
	MQS-1200 Pneumatic Double Roller Recycling And Purifying Machineꎬafter one year's usage,it was proved that the remnant scraped during the machinery's disposing cotton process via production practice can efficiently get rid of dust and for other purpose.The machinery's all round properties is all right. The machine is very convenient to use and maintain. It runs faultlessly and smoothly. This machinery doesn't pollute environment for it's enclosed type of getting rid of dust.
	Technical Parameters:
	Diameter of Muddler 350mm Length of Muddler 1010mm Purification Capacity ꇝ120kg/h Ratio of Purification ꇝ90% Quantity of Muddler 2pcs Total Power 21.5kw Overall Dimension(LꇁWꇁH) 3180ꇁ1560ꇁ2990mm