china Plastic machine manufacturer, wholesaler, supplier, export, factory,

Products

Total 15 Product(s) about Plastic machine

Select

Contact Now

1. SJ_90(100.110.120)Air-Cooling-Type-pelletizer(Recycling Machine)

Descriptions:
SJ-90.100.110.120.Air Ciiling Type Plastica Regenerative pelletizer manufactured by our factory, with is used for LDFE, HDPE waste Plastics regenerative pelletizing. The produce ofRegeneratire without air hole and water. with such features as easy operation, low cost high ourpit automatic constant temperature control. Automaticchangefiltrate wed stable performance. long operating life and low noise,it is a more ideal wast plastics film regenerative pelletizer.

Technical Parameters:

Type	SJ-90	SJ-100	SJ-110	SJ-120
Diameter of Screw	ꚵ90mm	ꚵ100mm	ꚵ110mm	ꚵ120mm
Screw L/D Ratio	20:1-22:1-(L/D)	20:1-22:1-(L/D)	20:1-22:1-(L/D)	20:1-22:1-(L/D)
Rational Speed of Screw Srem	10-110rpm	10-110rpm	10-110rpm	10-110rpm
Power of Main Motor	22kw	30kw	37kw	45kw
Output	60kg/h	90kg/h	110kg/h	130kg/h
Machine Weight(T)	2T	2.1T	2.2T	2.5T
Overall Dimensions(LꇁWꇁH)mm	5800ꇁ1250ꇁ1100	5900ꇁ1300ꇁ1200	6000ꇁ1350ꇁ1300	6200ꇁ1400ꇁ1350

Contact Now

2. Model-SJ500_1500-3_5-layer-co_extrusion-Film-Blowing-Production-Line(Film Blowing Machine)

Feature:
Haul-off unit is oscillating reverse by horizontalꇀ180ꇣIts structure is reasonable, so it economizes lots of energy and it is easy to maintain.By means of the reversing haul-off unit, films can be produced without requiring rotating diehead, so the structure of diehead is simplified. Reversing haul-offunit eliminates many problems of lingchannel for the rotating diehead, diffficult sealing for the melt, compound leakage being easy,unsymmetrical heating, difficult maintenance, macro film tolerance and so on Haul-off unit reduces the drgree of difficulty for recipe of the multi-layer coextruded product and production technical processing control, If the blown filmline is withIBC (Internal Bubble Cooling system), itcan produce film with the quality of more high-grade transp-arency and better all round performance.The produced film is very flat,reel is high-quality by theuse of reversing haul-off units. The film can meet the demand for the high-speed printing.

Technical Parameters:

Type		M3B-1300Q		M3B-1500Q	M3B-1700Q	M3B-2200Q
Max.Layflat Width mm		1200		1400	1600	2000
Film Layer		3		3	3	3
Film Thichness mm		0.02-0.12		0.02-0.12	0.02-0.12	0.02-0.12
Max.Output kg/h		120		150	180	240
Raw Material		MLLDPE/LLDPE/LDPE/EVA
Screw Diameter mm		ꚵ55ꇁ3		ꚵ60ꇁ3	ꚵ65ꇁ3	ꚵ70ꇁ3
Screw L/D Ratio L/D		28:1		28:1	28:1	28:1
Screw Max.Rotation Speed		100r/min		100r/min	100r/min	100r/min
Extruder Driving Power kw		22ꇁ3 ꆡꆡꆡ30ꇁ3ꆡꆡꆡꆡ37ꇁ3 ꆡꆡꆡꆡꆡꆡꆡ45ꇁ3
The Way of Screen Changing of Extruder			Manual Twin-station Changing Screen Quickly
Die Structure		With or Without IBC(Internal Bubble Cooling System)
Air-ring Srtucture		Dual-lip
Reversing Haul-off System	Film Turning Mode			Horizontal
Reversing Haul-off System	Angle of Reversing			ꇀ180ꇣ
Take-off Wind-up Speed		45r/min		45r/min	45r/min	45r/min
Total Power kw		ꇖ85		ꇖ110	ꇖ140	ꇖ220
Overall Dimensions(LꇁWꇁH) M		10ꇁ6ꇁ9		10ꇁ6ꇁ9.5	11ꇁ7ꇁ10	13ꇁ7ꇁ12
Weight T		ꇖ20		ꇖ25	ꇖ32	ꇖ40

Contact Now

3. SJ_75(85_100)-PE(HDPE-LDPE-LLDPE)Blowing-Film-Production-Line(Film Blowing Machine)

Use:

It applies to blow various LDPE, HDPE and LLDPE plasticfilms, widely applying to food, fruit, clothing, textile, vesttype bag and etc. Packing of civil industrial products.

Feature:

LLDPE MULCH BLOWN FILM LINES are made to process 100% LLDPE, LLDPE & LDPE blend, which could produce agriculture mulch film. The lines are adopted the most advanced hot channel technology,extrusion forming mulch film special air ring and so on new technologies.The lines are reasonable in design,beautiful in appearance, compact in structure, saving inspace and easy to maintain. Produced films are with the charactics of good plasticizing,high physicaland mechanical performance,strongtear resistance. Technologies for the lineare advanced and forming a complete set is rea-sonable, so the lines are high in output, low in energyconsumption,good in stability and reliability. They are the most ideal technical processing equipment to priduce agriculture mulch film in new century.

Technical Parameters:

Type	SJ-1700	SJ-2200	SJ-3400
Diameter of Screw(mm)	ꚵ75	ꚵ90	ꚵ110
Max.Layflat Width(mm)	1500	2000	3200
Film Thickness(mm)	0.005-0.08	0.005-0.08	0.005-0.08
Max.Output(kg/h)	ꇖ80	ꇖ100	ꇖ130
Screw L/D Ratio	28:1	28:1	28:1
Power of Main Motor(kw)	37	37	55
Power of Traction Motor(kw)	1.5	1.5	2.2
Total Power(kw)	65	90	145
OverallDimensions(LꇁWꇁH)mm	6000ꇁ2800ꇁ5800	8500ꇁ3800ꇁ8000	1000ꇁ5000ꇁ9600
Weight(T)	10	14	26

Contact Now

4. SJA_50Ziplock-Bag-Film-Blowing-Machine(Film Blowing Machine)

Use:
Raw materials of this machine should be selected LDPE, index in 4.5-5.5, widely applying to high gradepacking of food, sugar, medicine, jewelry, clothing, metal fittings, documents, directions, files andetc.,The market potentiality is great.
Feature:
We have the production history for many years, products for many years, products have the features of with reliable quality,easy to operate, correct. This machine is composed by heating, automatic control, die head of film blowing, drawing film in and etc. Mechanisms with reasonable designand stable performance.

Technical Parameters:

	Type	SJ50	SJ55	SJ60
Performance	Raw Material	P.V.C
	Film Thickness(mm)	0.02-0.08	0.02-0.08	0.02-0.08
	Film Width(mm)	70-300	150-500	200-700
	Output(kg/h)	8-40	15-50	20-60
Extruder	Screw Diamete(mm)	ꚵ50	ꚵ55	ꚵ60
	Screw L/D Ratio	28:1	28:1	28:1
	Main Motor(kw)	11	15	18.5
	Heating(kw)	10	13.7	18.5
Die-head	Die-Head Diameter(mm)	ꚵ40/80	ꚵ60/120	ꚵ80/140
Die-head	Die-Head Heating(kw)	1.8/2.2	2/2.5	3/3.5
Winder	Winding Ability(mm)	ꚵ400ꇁ400	ꚵ400ꇁ600	ꚵ400ꇁ800
Winder	Winding Motor(kg/Nm)	10	15	20
Else	Machine Weight(T)	1.5	1.8	2.2
Else	Machine Dimensions(M)	4ꇁ1.4ꇁ2.5	6ꇁ2.5ꇁ3.5	6.2ꇁ2.7ꇁ3.8

Related Keywords:film blowing machine, plastic machine, blowing machine, extruder, machine,

Contact Now

5. SJ_55,50,70-PP-Rotary-Die-head-Blowing-Film-Lin(Film Blowing Machine)

Use:

Mainly pack audio-video tape, toy, disc, magazine, glass, advertising material, camera, painting brush,shoes,sweet food and soon.

Feature:

1. Composed by three squeezing machines, joint squeezing rotatory die head, system of wind cooling and water cooling, double axial film, double-bubble squeezing productive line, infra-redheating, motor control system and etc. Parts.
2. Diehead and cooling wind ring rotates continuously in order to ensure drawing in and rolling up of film iseven and smooth.
3. (ꛕ100-200) changeof die head, applying to blow film with different specifications.
4. Dispose various functional elements on the spot accordingto the selection of consumer.

Technical Parameters:

Type	SJ-55	SJ-60	SJ-70
Diameter of Screw(mm)	ꚵ55	ꚵ60	ꚵ70
Max.Layflat Width(mm)	100-550	200-600	300-800
Film Thickness(mm)	0.01-0.10	0.01-0.10	0.01-0.10
Max.Output(kg/h)	40	45	65
Screw L/D Ratio	28:1	28:1	28:1
Power of Main Motor(kw)	11	15	18.5
Power of Traction Motor(kw)	1.1	1.5	1.5
Overall Dimensions(LꇁWꇁH)mm	4500ꇁ1100ꇁ3300	4800ꇁ1100ꇁ3300	5000ꇁ1500ꇁ3300
Weight(T)	1.9	3.0	4.0

Related Keywords:blowing machine, plastic machine,

Contact Now

6. SJ_PE-Heat-shrinkable-Film-Production-line(Film Blowing Machine)

Use:

High polymer materials such as rubber, plastic and fiber will have a certain shrinkage under a certain temperature. Most products are required to have a good thermal stability and small shrinkage, but some products ate required to have a large shrinkage when heated . The performance that high polymer materials will shrink by heating is opposite to that of metal materials . Taking advantage of this performance .we make the high polymer materials into heat-shrinkable rubber boot,heat-shrinkable membrane plastic,heat-shrinkable fiber and fiber-knitting which will be used for packging .

The heat-shrinkable membrane plastic is widely used recent years with the advantage of its transpatency,multiple variety,abound raw materials,ease of producing and using ,The table 1 shows the main performance and the application of the heat-shrinkable membtane plastic.

Besides the variety in table 1,,PA,PA,PET,PVCD, EVA etc also can be made into the heat-shrinkable membrane plastic, it is requirded that the hea-shrinkable membrane plastic be stable under normal temperature and shrink when heated. The characteristics of the heat-shrinkable membrane plastic : ꋙThe transpatency help to present the figure of the product.ꋚIntensive and firm, prevent from the flowability. ꋛSmall package capacilty reduce the storage and shipment cost.ꋜShower-proof,damp-proof and anti-fungus. ꋝHealthy and ease of clearing . ꋞ Nonrelease, ensure the prevention of fake and burglary. ꋟVarious specification of membrane and wide choices.ꋠRecycle used and do no harm to the environment .

application:

Specifications			Application
LDPE Heat-shrinkable membrane			Package,drink,foodstuff,medicirie,making-up,electrical appliance,siliconlice,synthetictesin,fetilizer,pottery,glass,wall paper,varnished wire,welding wire,rope mesh,floor borad,aluminun-base alloy,beer,mineral water etc.Electric wdlding rod and welding wire,various high strength packaging for metals.

Technical Parameters:

Type	SJ-700	SJ-1100	SJ-1700	SJ-2200
Max.Layflat Widty ꆡꆡꆡꆡꆡꆡꆡmm	600	1000	1500	2000
Film Thichness ꆡꆡꆡꆡꆡꆡꆡꆡmm	0.02-0.15	0.02-0.15	0.02-0.15	0.02-0.15
Output ꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡ kg/h	ꇖ35	ꇖ65	ꇖ85	ꇖ100
Raw Material	LLDPꆢLDPEꆢHDPE
Screw Diameter ꆡꆡꆡꆡꆡꆡꆡꆡmm	50	65	80	90
Screw L/D RatioꆡꆡꆡꆡꆡꆡꆡꆡL/D	28:1
Max.Screw Rotation Speedꆡꆡꆡ r/min	100	100	100	100
Extruder Driving Powerꆡꆡꆡꆡkw	11	18.5	30	37
Air Ring	Dual-lip Air Ring\Rorary Air Ring
Die Structure	Cylindrical Helical Die Core\360ꇣ Rotary Die Head
Max.Take-off or Wind-up Speedꆡꆡm/min	80	80	80	80
Total Powerꆡꆡꆡꆡꆡꆡꆡꆡꆡkw	ꇖ28	ꇖ42	ꇖ58	ꇖ75
Overall Dimensions(LꇁWꇁH)ꆡ M	4ꇁ1.8ꇁ3.6	5.8ꇁ2.2ꇁ6.0	6.5ꇁ2.7ꇁ6.0	8.2ꇁ3.2ꇁ8.8
WeightꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡꆡT	ꇖ2.2	ꇖ4.5	ꇖ6	ꇖ9

Contact Now

7. SJ_300-Model-Plastic-Crushing-Machine(Other Machines)

Technical Parameters:

Motor Power	7.5kw
Overall Dimension(LꇁWꇁH)	600ꇁ600ꇁ1450mm
Weight	0.4T

Related Keywords:Crushing Machine, Plastic Crushing Machine, Crusher, Machine, Plastic Machine,

Contact Now

8. SJB_400-Double_Head-Film-Blowing-Machine(Film Blowing Machine)

Technical Parameters:

Type	SLB-400
Diameter of Screw	55 mm
Screw L/D Ratio	28:1
No.of Heads	2pcs
Film-blowing Width	100-400mm
Film-blowing Thickness	LDPE0.015-0.20 HDPE0.008-0.05mm
Output	10-45kg/h
Total Power	28kw
Overall Dimensions(LꇁWꇁH)mm	5000ꇁ2500ꇁ3500
Total Weight	3500kg

Contact Now

9. SLW-Stretching-Cling-Film-Machine(Casting Machine)

Use:
1. The most usage pallet packaging: such as fertile, cement, chemicalindustrial raw material, building material etc.
2. Horizontal packaging: metal pipe, aluminum alloy material, timber etc.
3. Rotational twist: rolling paper, carpet etc.
4. Binding: glass container, acceptance etc.
5. Break-bulk packaging: soybean, grain, plastic particle etc.
6. Storage packaging: such as grass.
7. Manual packaging: it is used in wholesales, journal, printing, electronic product, foodstuff etc.
8. Ring twist packaging: type, wire, cable, steel silk etc.

Technical Parameters:

Type	SLW650	SLW1100
Diameter of Screw	ꚵ55	ꚵ65
Screw L/D Ratio	28:1	28:1
Power of Main Motor	11kw	18.5kw
Electric Heating (kw)	30	45
Max.Extruding Volume	35	60
Thickness (mm)	0.01-0.08	0.01-0.08
Power of Draw-off Motor	1.5kw	2.2kw
Refuse Recycling	Automatic Rewinding	Automatic Rewinding
Film Width(mm)	500	1000

Contact Now

10. GBD-Computer-Bag-Sealing-and-Cutting-Machine(Bag Making Machine)

Performance&Use::
GBD-700 FLAT-BOTTOMED & VEST BA G MAKER. The equipment is designed and manufactured on the basis of overseas advanced technology as wel as domestic leading productof the same kind. As a fully automatic computer-controlled bag maker, it is mainly used to manufacture bags with films like PE, PP, PVC, etc. Equipped with various functions, such as photoelectric controlled automatic feeding, photoelectric color-code follow-up, double or quadruple feeding, double or quadruple sealing, motor speed and bag length control by computer, automatic pile-up, etc. This machine is an ideal one to produce vest bag, flat-bottomed bag and fertilizer bag.

Technical Parameters:

Type	GBD-600	GBD-700
Bag Making Width	100-500mm	100-600mm
Bag Making Length	50-1200mm	50-1200mm
Bag Making Speed	20-400ꎨpcs/minꎩ	20-400ꎨpcs/minꎩ
Bag Making Thickness	0.008-0.10mm	0.008-0.10mm
The Kinds of Bag making	Printing Bag;White Bags
Bag Making Methods	Single Sealing and Single Cutting;Double Sealing and Single Cutting
Total Power	3.0kw	4kw
Overall Dimensions(LꇁWꇁH)mm	2800ꇁ1100ꇁ1500mm	3800ꇁ1300ꇁ1580mm

Select

First <<Previous 1 2 3 Next>> Last

Film Blowing Machine

Bag Making Machine

Casting Machine

Printing Machine

Recycling Machine

Other Machines

1. SJ_90(100.110.120)Air-Cooling-Type-pelletizer(Recycling Machine)

2. Model-SJ500_1500-3_5-layer-co_extrusion-Film-Blowing-Production-Line(Film Blowing Machine)

3. SJ_75(85_100)-PE(HDPE-LDPE-LLDPE)Blowing-Film-Production-Line(Film Blowing Machine)

4. SJA_50Ziplock-Bag-Film-Blowing-Machine(Film Blowing Machine)

5. SJ_55,50,70-PP-Rotary-Die-head-Blowing-Film-Lin(Film Blowing Machine)

6. SJ_PE-Heat-shrinkable-Film-Production-line(Film Blowing Machine)

7. SJ_300-Model-Plastic-Crushing-Machine(Other Machines)

8. SJB_400-Double_Head-Film-Blowing-Machine(Film Blowing Machine)

9. SLW-Stretching-Cling-Film-Machine(Casting Machine)

10. GBD-Computer-Bag-Sealing-and-Cutting-Machine(Bag Making Machine)